Calculate the curtain fabric width or blind order dimensions based on your window measurements.
2 Results
How much do you need?
Enter a number to see how much you need.
Change the values on the left and click Calculate.
How to Read Your Results
Check the manufacturer's measurement guidelines before buying. Fullness and panel count only apply to curtains; outside margins only apply to outside mounts.
Displayed based on the required quantity range. Please verify the product's intended use, specifications, ingredients, and compatibility before purchasing.
Measure your base dimensions according to your chosen installation type.
Set the fullness and panel count for curtains, or the deductions and margins for blinds.
Double-check the results against the manufacturer's ordering units.
What to Do in This Situation
For a 200cm track with 2x fullness and 2 panels, the total flat width is 400cm (200cm per panel). If it's 230cm from the ring to the floor with a 1cm clearance, the finished height is 229cm.
How Is This Calculated?
Total Curtain Width = Rail Width × Fullness Multiplier. Panel Width = Total Width ÷ Panels. Inside Mount Blind Width = Measured Width − Deduction. Outside Mount = Measured + (Margin × 2).
Change conditions to compare
Compare Fullness on the Same Rail
This compares different flat fabric widths while keeping the rail length the same.
The following is a hypothetical example. Check all the conditions under 'Expand Inputs' and adjust them to fit your situation.
1.5x Fullness
Total Flat Curtain Width
300 cm
Width per Panel
150 cm
Finished Curtain Height
229 cm
Expand Inputs
Installation type: Curtain · Rail
Base width: 200 cm
Base height: 230 cm
Curtain Fullness: 1.5x · Light Pleats
Number of panels: 2
Floor clearance / Inside mount width deduction: 1 cm
Outside mount margin (per side): 10 cm
2x Fullness
Total Flat Curtain Width
400 cm
Width per Panel
200 cm
Finished Curtain Height
229 cm
Expand Inputs
Installation type: Curtain · Rail
Base width: 200 cm
Base height: 230 cm
Curtain Fullness: 2x · Full Pleats
Number of panels: 2
Floor clearance / Inside mount width deduction: 1 cm
Outside mount margin (per side): 10 cm
What to Check Before Entering Values
Check whether the listed width is per panel or for a pair. The total flat width is different from the actual coverage width once installed.
The starting point for measuring height varies depending on whether you use pins, grommets, or a rail. Make sure to follow the seller's measurement guide.
Next Steps Based on Your Results
Once you have your finished width and height, check if the seller's dimensions are for the final sewn product. If you manually add extra fabric for hemming when ordering a finished product, the final size might be wrong.
Everyday Calc Notes · Updated 2026-10-15. Example results were generated using the calculation engine on this page. Purchasing a product does not affect the calculations.
FAQ
FAQ
What if the window width and track width are different?
Use the actual installed track width for curtains. If you only use the window width, you might not have enough fabric to cover the sides.
Does it automatically deduct the blind height too?
Inside mount heights use your exact input. Recommended deductions vary by product, so follow the manufacturer's guidelines.